Dynamic Inline Mixer NONFOOD

For shear sensitive mixing applications

INDAG intensive inline mixer type DLM/P is used to mix homogeneously mixer shear sensitive liquids with additives. Even if concentration of additive (i.e. 0,01%) is very small, mixing result will be absolutely homogeneous. Introduced mixing energy will not increase temperature of product more than 1°C. Especially shear sensitive products like aerated foams will not be destroyed by INDAG intensive inline mixer DLM/P. A small selection of examples for applications are: mixing of reactive additives into adhesive; mixing of pre emulsions with solvents; mixing of polybutadiene with water; mixing of collagen with colour; …


Advantages of DLM/P

  • Very good self-cleaning during CIP-cleaning
  • No pressure loss
  • Homogenous mixing result even for extreme concentration ratios
  • Efficient introduction of mixing energy
  • Mixing energy can be changed variable and adapted to product or capacity changes
  • Temperature increase less than 1 °C
  • Gentile mixing of shear sensitive products

Technology of DLM/P

INDAG intensive inline mixer type DLM/P consists of round shape mixing elements on rotor and in stator (mixer casing). Round shape mixing elements are extremely robust to allow mixing of highly viscous products (> 10,000,000 mPas). Mixing energy is introduced efficiently into product. It is possible (as an option) to heat or cool rotor and stator. INDAG mixer DLM/P is designed in a modular way. DLM/P is offered in a compact design (KB) and a foundation plate design (LB). Compact design means that rotor is supported by drive shaft of motor. Foundation plate design means that rotor is supported by its own bearing block. An own bearing block allows a loner rotor and a larger mixing volume. DLM/P can be equipped with single acting mechanical seal or double acting mechanical seal. INDAG mixers are designed likewise for explosive range and products (ATEX).

horizontal or vertical position of mixer is possible

Pressure levels
6 bar, 10 bar, 16 bar, 25 bar, 40 bar, 100 bar

1.4301 (AISI 304), 1.4404 (AISI 316 L), 1.4539 (AISI 904L), 14462 (AISI 318), Teflon coated, Tantal coated

Single acting mechanical seal; double acting mechanical seal; stuffing box seal, visco seal

EN, DIN, ANSI flange

Rotational speed
100 rpm to 1,800 rpm

50 l/h to 60,000 l/h

0 °C to 250 °C

1 mPas to 10,000,000 mPas

Mixer sizes and capacities of DLM/P

Type DLM/P ... ST**Unit123456
rotational speed*1/min300-1.800200-1.000200-1.000200-1.000100-1.000100-1.000
mixing stages KB8DLM/P-108 KBDLM/P-208 KBDLM/P-308 KBDLM/P-408 KBDLM/P-508 KBDLM/P-608 KB
mixing stages LB15DLM/P-115 LBDLM/P-215 LB    
mixing stages LB20  DLM/P-320 LBDLM/P-420 LBDLM/P-520 LBDLM/P-620 LB
mixing stages LB30  DLM/P-330 LBDLM/P-430 LBDLM/P-530 LBDLM/P-630 LB
*depends on product ** Type designation ST = standard execution has been left out within the table
Subject to technical modifications.

Dimension drawing of DLM/P with bearing block (LB)

DLM/P-115 LBmm5681382501500
DLM/P-215 LBmm5891653121700
DLM/P-315 LBmm5951803852000
DLM/P-415 LBmm6282104602200
DLM/P-515 LBmm6542424602300
* depends on the drive

Dimension drawing of DLM/P compact version (KB)

DLM/P-108 KBmm386138148976
DLM/P-208 KBmm407165148996
DLM/P-308 KBmm4131801901027
DLM/P-408 KBmm4462101901062
DLM/P-508 KBmm4722422181104
* depends on the drive
Scroll to top