DLM/H
Homogenizer NONFOOD

Emulsifying, dispersing and shearing

INDAG homogenizer type DLM/H is used for effective mixing, emulsifying, dispersing and aerating of fluids, solids. Shear rate of DLM/H is very high.
A small selection of examples for applications are: continuous production of stable emulsion of oil + water + emulsifier; dilution of Natriumlaurylethersulfat (SELS) + water. DLM/H homogenizers are used in production of colour, varnish, detergent, adhesive. INDAG DLM/H homogenizer for continuous process reduces process time and increases product quality compared to a batch mixing system.

 

Advantages of DLM/H

  • Very good self-cleaning during CIP-cleaning
  • Efficient introduction of mixing energy
  • Modular design of homogenizer
  • Hygienic design

Technology of DLM/H

INDAG homogenizer type DLM/H consists of a rotor and stator equipped with axial positioned mixing/shearing elements. Mixing energy is introduced efficiently into product. It is possible (as an option) to heat or cool stator. INDAG mixer DLM/H is designed in a modular way. DLM/H is offered in a compact design (KB) and a foundation plate design (LB). Compact design means that rotor is supported by drive shaft of motor. Foundation plate design means that rotor is supported by its own bearing block. An own bearing block allows smaller clearance between rotor and stator mixing elements and therefore even more intensive shearing effect. Homogenizer DLM/H with own bearing block can be equipped with every commercially available motor. DLM/H can be equipped with single acting mechanical seal or double acting mechanical seal. INDAG mixers are designed likewise for explosive range and products (ATEX).

Positioning
Horizontal or vertical position of mixer is possible

Pressure levels
6 bar, 10 bar, 16 bar, 25 bar, 40 bar, 100 bar

Materials
1.4301 (AISI 304), 1.4404 (AISI 316L), 1.4539 (AISI 904L), 1.4462 (AISI 318), 1.0421 (AISI 106-A)

Seals
Single acting mechanical seal; double acting mechanical seal; stuffing box seal

Connections
EN, DIN, ANSI flange

Rotational speed
1,500 rpm to 6,000 rpm

Capacities
50 l/h to 120,000 l/h

Temperatures
0 °C to 300 °C

Viskosities
1 mPas to 500,000 mPas

Mixer sizes and capacities of DLM/H

Type DLM/H ... ST**Unit2345
capacity*l/h50-6.000500-30.0002.000-55.0005.000-120.000
connectionDN25-5050-6580-100100-125
optionalASME1-2”2”-2½”3”-4”4”-5”
power*kW2,2-4,04-1111-2237,5-75
rotational speed*1/min1.000-6.0001.000-5.0001.000-3.6001.000-3.600
mixing stages compact version2DLM/H-202 KBDLM/H-302 KBDLM/H-402 KBDLM/H-502 KB
mixing stages bearing block version3 DLM/H-303 LBDLM/H-403 LBDLM/H-503 LB
*Capacity depends on product ** Type designation ST = standard execution has been left out within the table.
Subject to technical modifications.

Dimension drawing of DLM/H with bearing block (LB)

TypeUnitABH*L*
DLM/H-202 LBmm1301652501200
DLM/H-302 LBmm1621803121500
DLM/H-402 LBmm1742103851600
DLM/H-502 LBmm2022604601800
* depends on the drive

Dimension drawing of DLM/H compact version (KB)

TypeUnitABH*L*
DLM/H-202 KBmm130165170595
DLM/H-302 KBmm162180190775
DLM/H-402 KBmm174210190835
DLM/H-502 KBmm2022602381010
* depends on the drive
Scroll to top