DLM/H
Homogenizer FOOD

Emulsifying, dispersing and shearing

 

 

INDAG homogenizer type DLM/H is used for effective emulsifying, dispersing, shearing and mixing of fluids and solids. Applications are: for production of cosmetics oil, water and emulsifier are combined to stable emulsion. DLM/H produces mayonnaise from oil, vinegar solution and egg. Droplet sizes of smaller 1 µm are achieved by rotor tip speeds of >20 m/s and smallest clearance. Another application is mixing of phosphoric acid or citric acid into vegetable oil for degumming. With DLM/H homogenizer solids in liquids like onion pieces or corn pieces are sheared to very small pieces.

 

Advantages of DLM/H

  • Very good self-cleaning during CIP-cleaning
  • Efficient introduction of mixing energy
  • Modular design of homogenizer
  • Hygienic design
  • Execution with double jacket and further connections possible

Technology of DLM/H

INDAG homogenizer type DLM/H consists of a rotor and stator equipped with axial positioned mixing/shearing elements. Mixing energy is introduced efficiently into product. It is possible (as an option) to heat or cool stator. INDAG mixer DLM/H is designed in a modular way. DLM/H is offered in a compact design (KB) and a foundation plate design (LB). Compact design means that rotor is supported by drive shaft of motor. Foundation plate design means that rotor is supported by its own bearing block. An own bearing block allows smaller clearance between rotor and stator mixing elements and therefore even more intensive shearing effect. Homogenizer DLM/H with own bearing block can be equipped with every commercially available motor. DLM/H can be equipped with single acting mechanical seal or double acting mechanical seal.

Positioning
Horizontal or vertical position of mixer is possible

Pressure levels
6 bar, 10 bar, 16 bar, 25 bar, 40 bar

Materials
1.4301 (AISI 304), 1.4404 (AISI 316 L)

Seals
Single acting mechanical seal; double acting mechanical seal; even in aseptic execution

Connections
Dairy connections according to DIN 11851, DIN 11864, Tri Clamp, SMS

Rotational speed
1,500 rpm to 6,000 rpm

Capacities
50 l/h to 120,000 l/h

Temperatures
0 °C to 200 °C

Viskosities
1 mPas to 500,000 mPas

Mixer sizes and capacities of DLM/H

Type DLM/H... HY**Unit2345
capacity*l/h50-6.000500-30.0002.000-55.0005.000-120.000
connectionDN25-5050-6580-100100-125
optionalASME1-2”2”-2½”3”-4”4”-5”
power*kW2,2-4,04-1111-2237,5-75
rotational speed*1/min1.000-6.0001.000-5.0001.000-3.0001.000-3.000
mixing stages compact version2DLM/H-202 KBDLM/H-302 KBDLM/H-402 KBDLM/H-502 KB
mixing stages bearing block version3 DLM/H-303 LBDLM/H-403 LBDLM/H-503 LB
*Capacity depends on product ** Type designation HY = food execution has been left out within the table.
Subject to technical modifications.

Dimension drawing of DLM/H with bearing block (LB)

TypeUnitABH*L*
DLM/H-202 LBmm1011552501200
DLM/H-303 LBmm1471753121500
DLM/H-403 LBmm1572053851600
DLM/H-503 LBmm1932444601800
* depends on the drive

Dimension drawing of DLM/H compact version (KB)

TypeUnitABH*L*
DLM/H-202 KBmm101155170580
DLM/H-302 KBmm147175190755
DLM/H-402 KBmm157205190822
DLM/H-502 KBmm193244238990
* depends on the drive
Scroll to top